Neptune Systems Dosing & Fluid Metering System

$299.95
(No reviews yet) Write a Review
SKU:
NEP0187
Shipping:
Free Shipping

The Neptune Systems Dosing & Fluid Metering System is a multi-purpose dosing and fluid delivery system of uncompromising quality. Its one of the smartest dosing pumps on the market.

Automated water changes
Water changes with the DOS are super easy. All you do is place your empty vessel and your fresh stock of saltwater under your stand. Then, with the Apex Fusion wizard just tell it an amount of water you want to change over what length of time and the hours of the day you want it to happen and it figures it all out for you. It will perform an automatic, continuous water change for you. It gets better. If you have our dual optical water sensing accessory Apex Fusion will send you an email or text message letting you know it is time to change out the jugs. Less time pumping, siphoning, and sloshing water and more time enjoying a great aquarium.

Dosing micro amounts
If you need to dose tiny amounts of a particular solution, element or other fluid (like vodka dosing or Zeovit systems), the DOS is the perfect solution due to its precision controlled stepper motor. This ability to control pump movement in such a refined manner means that you can dose all the way down to 0.1ml at a time!

Large diameter tubing
Larger size tubing means that your pump does not have to work nearly as hard – or stay on for longer cycles. The most popular dosing pumps on the market use tube fittings with the tiny diameter of 1.67mm. The DOS uses much larger tubing and fittings. In fact, at 3.33mm in diameter, the pump on the DOS can handle 4x the flow of the most common pump style on the market. This means that your pump (and motor) will run 1/4 the time to pump the same amount of fluid. Less run time means long pump life.

Headache free interface
Programmability using Apex Fusion makes dosing a breeze.

Quick and easy tubing changes
No matter the pump, your tubeset will eventually go bad. Changing out the peristaltic pump tubing on the DOS is a snap. Literally! All you need to do to change out the pump tubing is squeeze the pump head and remove. Then take out the tubing, replace with a new one, and snap it back on. No screws, no impossible snap on covers and no fussy loose rollers to mess with. And, because you are not changing out an entire pump head, your costs are lower as well!

Adaptability
The DOS has an accessory port that will enable it to be connected to the DDR – Dual DOS Reservoir.

Super silent operation
The Neptune Systems engineering team has taken extensive steps both in how the pump operates as well as the enclosure design to ensure that the DOS system is one of the quietest dosing systems on the market for the fluid volumes it delivers

WHAT'S IN THE BOX

  • DOS pump
  • Aquabus cable
  • Power supply
  • 4 meters DOS tubing


SPECIFICATIONS

  • Size (Approx.): 9.5″ x 5″ x 5″
  • Weight (Approx.): 4 pounds
  • Lift Height: 24 feet (minimum at MSL)
  • Suction Height: 24 feet
  • Flow Rate: Variable (0.1mL – 250mL/min)
  • Power Requirement: 110/120V or 220/24oV
  • Requires: Apex, Apex Lite, or Apex Jr.